Finishing Pieces

Now that the chassis is solid again I have to take care of all the minor details before it is ready to compete. Stuff like seats, mounting the sunroof, fixing the gauge cluster (again).

First up: seat mounts. 3/16" plate steel to adapt the "new" buckets to the original mounts. Will weld some pieces of steel between the two plates to add some more strength.

Did a quick paintjob on the interior, basic white. Easy to clean, easy to touch up.
Picked up a second set of front strut assemblies so that the car would be drivable while I send the strut housing to Ground Control to get rebuilt with some Koni goodness.
After about 3 hours of work they are completely disassmbled and luckily I had a 36mm socket to ge the hub nut off. Hubs will be replaced when I get the assembled struts back.